ASME B5.62M pdf free download
ASME B5.62M-2016 pdf free download.Hollow Taper Tooling With Flange- Face Contact.
ASME B5.62M covers basic toolholder shanks with a hollow 1/9.98 taper, and simultaneous contact face and taper mating surfaces that are applicable to a range of machine tool applications. Hollow taper shank (HSK shank) Forms A. B, C. 0, E, F, and T with nominal flange diameters of 25 mm to 160 mm are covered by this Standard.
1-1.2 InterchangeabiLity
Machine tool interfaces conforming to this Standard are interchangeable with machine tool interfaces conforming
to DIN 69893-1:2003, DIN 69893-2:2003, DIN 69893- 5:2004, DIN 69893-6:2003, ISO 12164-1:2001, ISO
12164-2:2001. ISO 12164-3:2008, and ISO 12164-4:2008.
1-1.3 Forms
The FISK machine tool interfaces as manufactured in the seven basic shank forms (see Figure 1-1.3-1), and as customized by selection of several optional features, are suitable for use in a wide range of machine tool applications. The seven basic shank forms are as follows:
(a) Form A. Form A is the preferred design for use on machine tools with automatic tool changers. Keyways are located at the small end of the tool taper. Form A includes provision for through-tool coolant and manual tool change. See Figure 1-1.3-1. illustration (a).
(b) Form B. Like Form A. Form B is for use on machine tools with automatic tool changers. but it has a reduced taper compared to Form A. Keyways are located on the flange. Form B includes provision for through-flange coolant and manual tool change. See Figure 1-1.3-1, illustratIon (b).
(c) Form C Form C is similar to Form A but is intended for use on machine tools requiring manual tool change. Tools with Form C shanks are typically used on transfer lines, or as part of a modular tooling system. See Figure 1- 1.3-1, illustration (c).
(d) Form D. Form D is similar to Form B but is intended for use on machine tools requiring manual tool change. See Figure 1-1.3-1, illustration (d).ASME B5.62M pdf download.
