ASME A112.6.3 pdf free download

ASME A112.6.3-2016 pdf free download.Floor and Trench Drains.
1.2 Alternatives
The requirements of this Standard are not intended to prevent the use of alternative designs, materials, or methods of construction, provided such alternatives meet the intent and requirements of this Standard.
1.3 Units of Measurement
The values stated in either SI (metric) or U.S. Customary (yard/pound) units of measure are equivalent in application; however, each system is to be used independently of the other. In this Standard, US. Customary units are shown in parentheses. Combining values from the two systems can result in nonconformance with the Standard.
1.4 Illustrations
The illustrations included in this Standard are intended only to describe and portray typical drains and arc not intended to restrict design or to specify
requirements.
1.5 Reference Standards
This Standard refers to the following publications, and where such reference is made, it shall be to the current edition of the publication, including all amendments published thereto:
ASME A112.3.1, Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below-Ground
ASME 4112.18.1 /CSA B125.1, Plumbing Supply Fittings
ASME 516.25, Buttwelding Ends
Publisher: The American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 100165990 (www.asme.org)
ASTM A48, Standard Specification for Gray Iron Castings
ASTM A74, Standard Specification for Cast Iron Soil Pipe and Fittings
ASTM A307, Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A536, Standard Specification for Ductile Iron Castings
ASTM A563, Standard Specification for Carbon and Alloy Steel Nuts
ASTM A888, Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM 13584, Standard Specification for Copper Alloy Sand Castings for General Applications
ASTM C564, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
ASTM C1440, Standard Specification for Thermoplastic Elastomeric (TI’E) Gasket Materials for l)rain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
ASTM D1784, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds
ASTM D2661, Standard Specification for AcrylonitrileButadiene-Styrenc (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D3350, Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3965, Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-l3utadiene- Styrene (A13S) Materials for Pipe and Fittings
ASTM D.fl01, Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM D4329, Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of l’lastics
ASTM G152, Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153, Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
Publisher ASTM International, 100 Barr Harbor Drive, West Conshohockcn, PA 19428-2959 (www.astm.org)
SA B602, Mechanical couplings for drain, waste, and vent pipe and sewer pipe
Publisher: CSA Group, 178 Rexdale Boulevard, Toronto, ON, M9W 1R3, Canada (www.csagroup.org)
1.6 Definitions
area, grate-free: total area of the drainage openings in the grate.
area, open: see area, grate-free.
blowhok: a hole in casting due to air or gas in the metal or mold.
cold shut: casting defects formed when two streams of metal become so cold that they do not fuse upon meeting, creating an incomplete casting.
drain, adjustable floor: a floor drain designed for use in finished floor areas with an adjustable strainer and grate and a seepage flange on the body.
drain, area: a receptor intended to receive and convey runoff water or other liquid from the areas immediately adjacent to the building structure to the drainage system (see Fig. 1).
drain, floor: a receptor intended to receive and convey runoff water or other liquid from building floors to the drainage system (see Figs. 2 and 3).
drain, french: a long, narrow receptor intended to receive and convey runoff water or other liquids to the drainage system (see Fig. 4).
fin: projection on castings due to imperfect joints.
lwel-rcsis font grate: a grate designed to resist entry of high-heeled shoes.
weep hole: a perforation (opening) above the seepage (flashing) flange intended to receive leakage from around the drain and direct it into the sump.ASME A112.6.3 pdf download.