ASME B30.9 pdf free download

ASME B30.9-2010 pdf free download.Slings Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings.
SECTION II: SCOPE EXCLUSIONS
The B30 Standard does not apply to track and automotive jacks, railway or automobile wrecking cranes, shipboard cranes, shipboard cargo-handling equipment, well-drilling derricks, skip mine hoists, truck body hoists, car or barge pullers, conveyors, excavating equipment, or equipment covered under the scope of the following standards: AlO, A17, A90, A92, A120, B20, B56, and B77.
SECTION III: PURPOSE
The B30 Standard is intended to
(a) prevent or minimize injury to workers, and otherwise provide for the protection of life, limb, and property by prescribing safety requirements
(b) provide direction to manufacturers, owners, employers, users, and others concerned with, or responsible for, its application
(c) guide governments and other regulatory bodies in the development, promulgation, and enforcement of appropriate safety directives
SECTION IV: USE BY REGULATORY AGENCIES
These Volumes may be adopted in whole or in part for governmental or regulatory use. If adopted for governmental use, the references to other national codes and standards in the specific volumes may be changed to refer to the corresponding regulations of the governmental authorities.
SECTiON V: EFFECTIVE DATE
(a) Effective Date. The effective date of this Volume of the 1330 Standard shall be 1 yr after its date of issuance. Construction, installation, inspection, testing, maintenance, and operation of equipment manufactured and facilities constructed after the effective date of this Volume shall conform to the mandatory requirements of this Volume.
(b) Existing Installations. Equipment manufactured and facilities constructed prior to the effective date of this Volume of the 1330 Standard shall be subct to the inspection, testing, maintenance, and operation requirements of this Standard after the effective date.
it is not the intent of this Volume of the B30 Standard to require retrofitting of existing equipment. However, when an item is being modified, its performance requirements shall be reviewed relative to the requirements within the current volume. The need to meet the current requirements shall be evaluated by a qualified person selected by the owner (user). Recommended changes shall be made by the owner (user) within 1 yr.
SECTiON VI: REQUIREMENTS AND RECOMMENDATIONS
Requirements of this Standard are characterwed by use of the word shall. Recommendations of this Standard are characterized by the word should.
SECTiON VII: USE OF MEASUREMENT UNITS
This Standard contains SI (metric) units as well as
U.S. Customary units. The values stated in U.S.
Customary units are to he regarded as the standard.
The SI units are a direct (soft) conversion from the U.S.
Customary units.
SECTION VIII: REQUESTS FOR REVISION
The B30 Standards Committee will consider requests for revision of any of the volumes within the B30 Standard. Such requests should be directed to
Secretary, 1330 Standards Committee
ASME Codes and Standards
Three Park Avenue
New York, NY 10016-5990
Requests should be in the following format:
Volume: Cite the designation and title of the volume.
Edition: Cite the applicable edition of the volume. Subct Cite the applicable paragraph number(s)
and the relevant heading(s).
Request: Indicate the suggested revision.ASME B30.9 pdf download.